Dental burs are a basic necessity for dentists across most types of specialties. Among the wide variety of dental burs available for use in dentistry, dental carbide burs have their unique properties to them. They are used for very important procedures and their misuse can potentially cause damage to the patient’s mouth. The following article aims to provide information about dental carbide burs and their uses.
Table of Contents
Properties of 245 Carbide Burs
Dental carbide burs are made, as their name suggests, of a carbide metal alloy. A carbide metal allow is an alloy that contains a combination of carbon with other metals in it. A common example of such an alloy would be steel, which is a combination of iron with some 2.5% carbon. 245 carbide burs refer to burs made of an alloy containing carbon and tungsten.
Naturally, as seen in the case of steel, 245 burs are significantly more resistant to physical forces and much more durable. This offers the dentist a very resilient tool that can be used on very tough types of tissues found in the mouth. Additionally, the strength of the tungsten – carbon alloy means that the bur does not wear too much, leading to low replacement frequency.
Another important property that the 245 carbide bur has is the fact that it’s resistant to corrosion. Naturally, the environment in which dental burs are used is surrounded by water and other oxidative materials. This alloy is highly resistant to corrosion and does not oxidize easily. This prevents material erosion as well as serious infections that might occur in the mouth.
Types of 245 Carbide Burs
As with all dental burs, 245 dental carbide burs also come in two versions to be used in different circumstances. One is the high – speed version (FG) while the other is the low – speed version. (RA) These are suitable for different operating conditions such as required precision, suitable heat levels, and low or high air – pressure handling capabilities.
Uses of 245 Carbide Burs
245 carbide burs show excellent performance when it comes to some specific properties. They are highly accurate, highly efficient, cause little chatter, provide superior control, and excellent finish. All these properties make an excellent choice for particular kinds of procedures that otherwise cannot be performed properly with other, more ordinary types of dental burs.
The procedures include the class 2 Amalgam preparation and smoothing of occlusal walls. Class 2 Amalgam preparation requires delicate and deep cutting and sculpting of the tooth and smoothing of occlusal walls requires high levels of finish to be achieved. The resilience and high grit of 245 carbide burs are exactly the properties a bur used in these procedures needs.
Quality
245 carbide burs, as well as any other bur type, have their own unique properties and qualities to them. As a result, their manufacturing procedure should be strictly controlled and properly executed for the burs to be of high quality. Therefore, the distributor of these burs should be chosen carefully, as not all products in this field are necessarily of adequate – enough quality.
Eagle Dental Burs provide dental burs of excellent quality which can be used freely without worry of them underperforming. They are a reliable and expert supplier of dental burs and other dental medical equipment, adhering to the strictest international production protocols.
On the other hand, the availability of worldwide shipping had caused many online shopping websites to spring up. These websites offer cheap counterpart products to their mainstream competitors. While the low price may be tempting, their products can come with a more than questionable quality. These websites should not be easily relied upon when it comes to burs.
Pricing
The pricing of 245 carbide burs depends of course on their quantity and quality. Dental burs usually come in packs of several units, and these can vary widely: some suppliers provide 6 units a pack whilst others provide more than 10. Quality is also a major factor in pricing. while high – quality bur manufacturers are more expensive; the cheap ones are of less than adequate quality.
Eagle Dental Burs provide 245 carbide burs provide high – quality, Israeli – made burs that cost 15$ a pack, and that pack contains 6 blades. On the other hand, other online websites of non – western origin provide burs at lower prices. These are naturally not recommended and should not be relied upon in terms of product quality. Otherwise, it could cause damage.
Conclusion
245 carbide burs are very important tools used by many dentists around the world. Their excellent durability, oxidation resistance, and low changing frequency make them excellent choices for the above – mentioned dental procedures. As emphasized, special care should be taken when choosing the burs’ supplier. Otherwise, one might end up with sub – par products.